Final Coat

High solids, high gloss acrylic floor polish

Application Guide

IMPORTANT NOTE: Before use on a job, thoroughly test this product in an inconspicuous area to assure performance and appearance. Use only in well ventilated areas.

SURFACE PREPARATION:
Surface must be completely clean and dry to the touch. Remove dirt, wax, old floor polish and defective coatings with proper cleaning agents. After cleaning, allow surface to dry prior to Final Coat. If application is on new unsealed surface, the surface must be sealed with one of GST's premium sealers; i.e. Wet-Look Water Base or Wet-Look High Gloss, especially when dealing with porous surfaces. Industry recommendation is that new concrete should cure for at least 14 days before application of a sealer.

APPLICATION:
Thinning is not required. Use as is. Apply Final Coat with a wax applicator, sponge mop or clean cloth. Apply a light even coat (do not allow to puddle). Allow “dry to touch” drying time before walking on surface or applying an additional coat. Two or more light applications are recommended to for initial application. Additional coats provide added gloss and protection. Immediately wipe up pools or puddles were over application has occurred.

MAINTENANCE:
Clean floor with water and if necessary using a mild detergent. Do not use ammonia, ammoniated cleaners, or abrasives. Periodic buffing or a light reapplication may be needed in high traffic areas or where scratches have occurred.

CLEANUP:
When wet, flush with clean water

REMOVAL - Reapplication:
When removal is necessary use a high ammoniated acrylic floor polish cleaner. Total removal should not be necessary for 2 to 5 years. Reapply when surface no longer returns to high gloss after buffing.

SAFETY PRECAUTIONS:
CAUTION: LIQUID CONTACT WITH EYE AND SKIN CAUSES IRRITATION. DO NOT INGEST. Contains propylene glycol monobutyl ether, CAS # 5131-66-8. Avoid contact with eyes and skin. Wash hands thoroughly after using and before eating and smoking. If spillage has occurred, absorb and dispose of according to local regulations.

KEEP THIS PRODUCT OUT OF THE REACH OF CHILDREN.

FIRST AID: Should eye contact occur, flush with plenty of water for at least 15 minutes and get medical attention if vision is disturbed. For skin wash thoroughly with soap and water. If swallowed get medical attention immediately. DO NOT induce vomiting.