Final Coat

High solids, high gloss acrylic floor polish

Overview

GST's Final Coat is the premier high solids acrylic polymer floor polish for gloss and durability. It represents the first major improvement in masonry floor care technology within the last 5 years. Its' 29% high solids formulation provides maximum scuff and heel mark resistant gloss for lower maintenance costs. Final Coat requires fewer coats than are needed with conventional lower solids products and stays glossy even after numerous scrubs. Also, it has the advantage of a wide spectrum maintenance program, from low speed wet spray buffing and frequent ultra-high-speed burnishing to “walk-away” application maintenance programs. Uniquely formulated for exceptionally severe high traffic areas where resistance to heel marking, soil retention, and scuffing are of prime importance. Provides stunning “wet-look” highlights to colored or stamped concrete floors while offering excellent slip resistance. Recommended for use in malls, hotels, retail stores, hospitals and schools. Final Coat can also be used on most conventional resilient floors (rubber, asphalt tile, vinyl, linoleum, and all types of composition tile).

Limitations: Not for unsealed porous surfaces. Not recommended for exterior use. Surface can be slippery when wet.

Features

High solids
High gloss after application
Long lasting, non yellowing
Easy application
Buffable, we or dry
Heel mark resistant
Slip resistant
Scuff tolerant

Use On

Troweled, colored or stamped concrete
Natural and manufactured stone
Conventional resilient floors
Concrete paver tiles
Sealed Flagstone
Vitrified brick
Glazed tile
Terrazzo